http://www.neonlightssigns.info/yorkville-speaker-home/
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Yorkville Speaker Home
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
|
Yorkville WM5T/70 $71.2 Yorkville WM5T/70 Looking for a way to hide speakers in a room? Don't have space to put a speaker? The Coliseum WM5T in-wall, flush mount loudspeaker is your answer. This compact speaker is ideally suited for many applications: commercial installations, home theatre, or home stereo. Using the volume between wall studs as an enclosure, this bass reflex speaker has a 5" woofer and mylar dome tweeter that provide impressive bass, and clean, crisp high frequency response. Installation is a snap with the provided cutting/painting template, while press-fit grille hides all mounting holes to give the WM5T a very clean and finished look. All mounting hardware is also provided. The baffle is made of white ABS plastic with a matching, white, perforated metal grille. It can be easily painted to match its surroundings. The WM5T features built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (25 watt) operation mean the WM5T’s can be driven by virtually any amplification or paging system including the Coliseum CA1 or CA1T. Get Your Yorkville WM5T/70 Today! |
|
|
Yorkville U215B $1919.2 Yorkville U215B The ultra efficient Yorkville U215B is a trapezoidal shaped, 1600 watt cabinet with a carefully chosen crossover point to seamlessly match the directivity characteristics of the conical horn to the neodymium woofer. With such a compact footprint and weight, the U215B easily finds its home as a FOH speaker, drum monitor, side fill, front or down fill or virtually any situation where a professional quality sound reinforcement system is required. The U215 can be easily bi-amplified by way of a switch on the rear jackplate, or used with any elite series subwoofer for extended low frequency support. The Yorkville UP215 Unity processor, designed specifically to optimize the sonic characteristics of the U215B has also been developed to ensure trouble free, "plug-and-play" full range or Bi-amp operation with or without a subwoofer. The MTM (Mid-Top-Mid) cabinet design was chosen as the perfect vessel for the U215 drivers to be mounted in. An MTM design is ideal as it makes the most efficient use out of the Unity conical horn. This allows for better imaging and balanced summation between horn and subwoofers. The trapezoidal footprint is identical to the U15 allowing them to be mated together in a variety of ways where an unconventional cabinet array is required. It accomplishes this while still maintaining the ideal array angle to best couple multiple cabinets. The lightweight neodymium drivers help to keep the U215B total weight under 100lbs, virtually unheard of for a 1600 watt 2x15" cabinet. Compare that to the 1500 watt Yorkville E2152 at 167lbs and it is easily the lightest in its class. Integrated flypoints means the U215B cabinet can be easily used in many applications, as part of an installed system, or as the center-point of a touring or club rig. The trapezoidal shape was designed with multi-box, tight pack arraying in mind. We put extensive Research and Development using the latest in Acoustical Measurement and Modeling software to ensure that all of the Unity Series cabinets function equally on their own or in tight pack cluster arrays. Flying in the air is possible with the addition of an optional ATM Flyware bumper system, allowing tight-pack horizontal arrays of up to 3 cabinets at the optimum splay to maximize the Unity horn's dispersion pattern while minimizing phasing and lobing. Features Of The Yorkville U215B Unity Series Speaker: Unique 60x60 Unity horn assembly combines mid and high frequency drivers on conical horn All four component drivers mounted in a Unity horn are mechanically time-aligned to measure and act like a single point source No self-interference between individual loudspeaker components Two 15-inch high power lightweight (10lbs) Neodymium woofers with three-inch voicecoil Biamp mode switch Ten rigging points allow for all possible mounting and flying configurations 15mm 11-ply birch cabinet construction Two-year uncon |
|
|
Yorkville C120/70 $95.2 Yorkville C120/70 The Coliseum C120 is a high-end, water resistant speaker featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. The C120 is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120 will handle 100 Watts of continuous music and is accurate from 75 Hz to over 19 kHz. The C120 is designed to allow a multitude of mounting options including a 'press-fit' microphone stand mount, integral key hole screw-slots or the provided metal U-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The optional swivel mount (C120MOUNT) allows the C120 to be dropped through a ceiling or suspended from a wall in any number of angles and includes a safety wire for peace of mind. For maximum convenience in live or mobile applications, the back plate features push terminals and dual 1/4" inputs. The C120 is available in a low-reflectance black (C120) or white (C120W) finish with a matching, perforated metal grille and can be painted to match its surroundings. Also available is the C120/70. The integrated 70V 'matching transformer' allows multiple C120's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (6W, 12.5W, 25W or bypass) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets. Get Your Yorkville C120/70 Today! |
|
|
Used Yorkville C120 Small Speaker $49.99 In Store Used USED YORKVILLE C120 SMALL SPEAKER |
|
|
Yorkville C120P $183.2 Yorkville C120P The Coliseum C120P is a high-end installation speaker, featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact powered speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. The C120P is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120P will handle 80 Watts of continuous music and is accurate from 75 Hz to over 19 kHz. The C120P is designed with integral key hole screw-slots for the provided metal U-bracket, which allows it to be angled up, down or sideways depending on the mounting orientation. The C120P is shipped with a mounting U-bracket and all the necessary hardware for installation applications. It comes standard in a low-reflectance black finish with a matching, perforated metal grille and can be painted to match its surroundings. Specifications: System Type 2-Way Active or Passive Active Program Power (Watts)80 Biampable No Max SPL (dB) 101 Driver Configuration Tweeter, 5 inch HF Driver(s) Aimable Mylar Tweeter LF Driver(s) 5 inch Inputs - 1/4" Jacks 1 (1 x 1/8inch) Mixer Controls Level, Treble, Bass, Mono/Stereo Select Flying Hardware U-Bracket, 2 Rear Key Hole Mounts Included Hardware U-Bracket Enclosure Materials Injection Molded, ABS Plastic Grille Perforated Steel Covering / Finish Low Reflective Black Dimensions (DWH xbackW, inches) 6.5 x 6.75 x 10.25 x 6 Dimensions (DWH xbackW, cm) 16.5 x 17 x 26 x 16 Weight (lbs/kg) 8.5 / 3.9 Get Your Yorkville C120P Today! |
|
|
Yorkville U215 $1719.2 Yorkville U215 The U215’s Unity™ horn combines a single 1-inch-throat (1.75" diaphragm) compression driver with three 5-inch ceramic magnet midrange drivers firing through time-aligned slots in the horn-wall. This seamlessly blends the mid and high frequencies while providing exceptional power capacity and clarity from 300Hz to 20 kHz. Pair of advanced, high-efficiency, 800-Watt fifteens with ultra lightweight Neodymium magnets provides clean, powerful, extended lows to complete the package. The U215 comes with a high-definition passive crossover featuring Yorkville's exclusive PTC™ non-interruptive horn protection. However it can be easily bi-amplified thanks to a switch on the rear jackplate, and with the optional UP215 Unity™ processor, designed specifically to optimize the sonic characteristics of the U215. The UP215 has been developed to ensure trouble free, plug-and-play operation whether the U215 is being run in passive or active bi-amped mode. It further offers a subwoofer output. The ultra efficient U215’s trapezoidal enclosure provides a compact footprint that easily finds its home as a FOH speaker when deployed vertically on stage or on scaffold staging, either singly or in tight-packed arrays. Alternately, with its built-in flypoints, the U215 can be flown vertically or horizontally in touring or fixed systems. Other possible applications include side fill, front or down fill or virtually any situation where a professional quality sound reinforcement enclosure is required The MTM (Mid-Top-Mid) cabinet design was chosen as the perfect vessel for the U215 drivers. An MTM design is ideal as it makes the most efficient use out of the Unity™ conical horn. This allows for better imaging and balanced summation between horn and subwoofers. The trapezoidal footprint is identical to the U15 allowing them to be mated together in a variety of ways where an unconventional cabinet array is required. Features: Unique 60º x 60º Unity™ horn assembly combines mid and high frequency drivers on conical horn. All four component drivers mounted in a Unity™ horn are mechanically time-aligned to measure and act like a single point source. No self-interference between individual loudspeaker components. Two 15-inch high power lightweight (10lbs/4.5kgs) Neodymium woofers with three-inch voicecoil. Biamp mode switch Ten rigging points allow for all possible mounting and flying configurations. 15mm 11-ply birch cabinet construction. Two-year unconditional warranty Black Ozite (Carpet) Finish Get Your Yorkville U215 Today! |
|
|
Yorkville C110 $47.2 Yorkville C110 The Coliseum C110 is a high quality, weather resistant speaker, which features specially treated drivers in a rugged ABS plastic enclosure. It is well suited for many applications including commercial installations, home theaters, home stereos, reference monitors and personal stage monitors. The C110 is a bass reflex enclosure with a tuned port and a 5" woofer whose computer-optimized design gives improved bass performance over conventional 5" woofer enclosures. With a power rating of 40 Watts of continuous music power the C110 is accurate from 85 Hz to 19 kHz with an efficiency of 92 dB. The C110 features an internal 70V matching transformer, which allows multiple C110's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (10W, 20W, 30W or off) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets. A wide variety of mounting options are available using the four integral screw-slots or the provided metal L-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The C110 is available in a low-reflectance black or white finish (C110W) with a matching, perforated metal grille and can be painted to match its surroundings. Specifications: System Type 2-way, Full Range Active or Passive Passive Program Power (Watts) 40 Nominal Impedance (Ohms) 8 Sensitivity (dB @1Watt/1m) 92 Frequency Response (Hz +/- 3db) 85 - 19,000 Driver Configuration Tweeter, 5 inch HF Driver(s) Mylar Tweeter HF Dispersion (°H x °V) 90x90 LF Driver(s) 5 inch Inputs 1 Inputs - Screw Terminal 1 Other Controls / Features Internal 70V Transformer with Switchable Taps (10W / 20W / 30W / Off) Flying Hardware L-Bracket, Rear Key Hole Mounts (4) Enclosure Materials Injection Molded, ABS Plastic Port(s) 1 Grille Perforated Steel Covering / Finish Low Reflective Black Optional Covering / Finishes Low Reflective White Dimensions (DWH xbackW, inches) 5.5 x 6.25 x 8.9 Dimensions (DWH xbackW, cm) 14 x 15.9 x 22.6 Weight (lbs/kg) 3.8 / 1.7 Get Your Yorkville C110 Today! |
|
|
Yorkville YSM2p $207 Yorkville YSM2p The YSM2P powered speaker enclosure system is an advanced studio monitor. It is equally at home in a professional recording studio, project studio, or even a living room. Development of the renowned YSM1P has helped us provide the YSM2P with functionality and user-friendliness at a truly reasonable cost. Components include a 1-inch domed tweeter and a 5 1/4-inch woofer. The woofer is a low-resonance 4-ohm driver fabricated with a woven laminate cone (which helps promote use of the full 32 watts of power from the YSM2P’s internal LF amplifier). The HF side of amplifier is capable of delivering up to 14 watts to the 1-inch, high-performance tweeter. Optimal performance is also achieved by use of an active crossover specifically developed for the YSM2P. The YSM2P also features an input trim control for precision tweaking according to room acoustics. A smooth frequency response gives the YSM2P ample source representation without equalization. A precisely tuned active crossover enables each driver to take advantage of the bi-amplification. ¼-inch or XLR input jacks allow for maximum versatility. The input, located at the rear of the enclosure, accepts line-level signal only (not speaker level). It is ideal to use balanced, shielded cables with a ¼-inch (TRS) or XLR connector however unbalanced 1/4-inch jacks can also be used. Each YSM2P should be connected to a single line-level source (e.g., the Right or Left line output from a mixer or preamp). If you want to use multiple YSM2Ps, they can be interconnected using "Y" adaptors. The Input Trim control allows you to adjust the volume of each monitor until the desired sound level and Left/Right (or Front/Rear) balance is achieved. If clipping distortion becomes audible, reduce the Input Trim level. If more signal reduction is needed, lower your line level from the source with the mixer’s master level controls. Shielded drivers ensure the YSM2P’s can be located close to computer and video monitors or hard drive recording systems. The YSM2P uses a bi-amplification system with separate power amps for the tweeter and the woofer The YSM2P utilizes an electronically active crossover network tuned specifically for each driver. This type of crossover network divides the signal much more precisely than traditional passive crossover networks. Yorkville YSM2p Features: Bookmatched Left/Right pairs Bi-amplified operation features 32-watts of low frequency power and 14-watts for the high frequency Components include a 1-inch domed tweeter and a woven laminate cone 5 1/4-inch woofer Precisely tuned active crossover enables each driver to take advantage of the bi-amplification 1/4-inch TRS or XLR input jacks Input Trim control allows you to adjust the volume of each monitor Power switch is located at the rear of the enclosure Get Your Yorkville YSM2p Today! |
|
|
Yorkville C120 $79.2 Yorkville C120 The Coliseum C120 is a high-end, water resistant speaker featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. The C120 is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120 will handle 100 Watts of continuous music and is accurate from 75 Hz to over 19 kHz. The C120 is designed to allow a multitude of mounting options including a 'press-fit' microphone stand mount, integral key hole screw-slots or the provided metal U-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The optional swivel mount (C120MOUNT) allows the C120 to be dropped through a ceiling or suspended from a wall in any number of angles and includes a safety wire for peace of mind. For maximum convenience in live or mobile applications, the back plate features push terminals and dual 1/4" inputs. The C120 is available in a low-reflectance black (C120) or white (C120W) finish with a matching, perforated metal grille and can be painted to match its surroundings. Also available is the C120/70. The integrated 70V 'matching transformer' allows multiple C120's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (6W, 12.5W, 25W or bypass) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets. Specifications: System Type 2-way Active or Passive Passive Program Power (Watts) 100 Nominal Impedance (Ohms) 8 Sensitivity (dB @1Watt/1m) 94 Max SPL (dB) 104 Frequency Response (Hz +/- 3db) 75 - 19,000 Driver Configuration Tweeter, 5 inch HF Driver(s) Aimable Mylar Tweeter HF Dispersion (°H x °V) 90x90 LF Driver(s) 5 inch Inputs 3 Inputs - 1/4" Jacks 2 Inputs - Screw Terminal 1 (Push Terminal) Flying Hardware U-Bracket, 2 Rear Key Hole Mounts, Mic Stand Mount Optional Flying Hardware Swivel Mount (C120MK) Enclosure Materials Injection Molded, ABS Plastic Port(s) 1 Grille Perforated Steel Covering / Finish Low Reflective Black Optional Covering / Finishes Low Reflective White Dimensions (DWH xbackW, inches) 6.5 x 6.75 x 10.25 x 6 Dimensions (DWH xbackW, cm) 16.5 x 17 x 26 x 16 Weight (lbs/kg) 4.7 / 2.1 Get Your Yorkville C120 Today! |
|
|
Yorkville U15 $1319.2 Yorkville U15 Engineered for the serious pro audio user, the U15 is among the most advanced, most versatile and most efficient high-powered portable P.A. box available in the market today. The U15 is a radical loudspeaker cabinet design utilizing the patented Unity™ Summation Aperture Horn Technology, which was invented by loudspeaker designer Tom Danley and licensed from Sound Physics Labs Inc. The U15 provides remarkably even high / mid frequency distribution from the 60º x 60º horn assembly. The combination of the conical, constant directivity horn, 15" new technology Neodymium woofer and our unending attention to details, right down to the ideal trapezoidal shaped cabinet has yielded an extremely versatile product. The U15 Unity™ horn combines a single 1 inch throat (1.75" diaphragm) compression driver with three 5-inch ceramic magnet midrange drivers on a single highly efficient conical horn. This combines high and mid frequencies driver components in a single 60º x 60º conical horn that produces frequencies from 300Hz to 20kHz. Added to all this is the new technology, ultra lightweight Neodymium 15” woofer to complete the package. The U15 can be easily bi-amplified by way of a switch on the rear jackplate, or used with any élite series subwoofer for extended low frequency support. The UP15 Unity™ processor, designed specifically to optimize the sonic characteristics of the U15 has also been developed to ensure trouble free, “plug-and-play” full range or Bi-amp operation with or without a subwoofer. The compact and ultra efficient U15 is a trapezoidal shaped, 800 watt cabinet with a carefully chosen crossover point to seamlessly match the directivity characteristics of the conical horn to the neodymium woofer. With such a compact footprint and weight, the U15 easily finds its home as a FOH speaker, drum monitor, side fill, front or down fill or virtually any situation where a professional quality sound reinforcement system is required. The unparalleled sonic clarity and smooth frequency response also makes it great for music playback. With pre-recorded music the U15 has the hi-fidelity to put it on par with some of the best studio reference monitors. But unlike traditional studio reference monitors, the U15 is capable if putting out a very high-efficiency 800 watts into 4ohms. The trapezoidal shape was designed with multi-box, tight pack arraying in mind. Looking at a polar plot for a 3 box, tight-pack array one would notice how extremely well behaved it is. Furthermore, due to the nature of the conical horn, the polar pattern remains quite constant regardless of any vertical, or off axis rotation put upon it. It acts the same on all vertical axis, making it ideal for use upright or on its’ side, without the need to ever rotate the horn. The U15's polar plot at 1 KHz, 2Khz & 4Khz U15 3 box array Polar Plot at 1Khz, |
|
|
Yorkville Beige Leather Armless Module $999 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville Brown Leather Armless Module $999 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville Black Leather Armless Module $999 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville Beige Leather Modular Sofa $2599 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville Brown Leather Modular Sofa $2599 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville Black Leather Modular Sofa $2599 With its modern chesterfield design, tufted upholstery and durable leather covering, the Yorkville is a fine example of contemporary British design. |
|
|
Yorkville CM5/70 $23.2 Yorkville CM5/70 The CM5/70 is a 30-watt 5-inch high performance ceiling mount loudspeaker. Ideal for any background music or paging system where superior sound quality is a priority, this speaker is made for louder club or restaurant / retail environments. Built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (30 watt) operation means that virtually any amplification or paging system, including the Coliseum CA1 or CA1T can drive the CM5/70. Get Your Yorkville CM5/70 Today! |
|
|
Yorkville CV1 $36 Yorkville CV1 The Coliseum CV1 in-wall speaker volume control is the ideal simple, user-friendly solution installations requiring remote regulation of individual room level in complex 70-volt systems. Designed for easy installation, the CV1 is wired for simple inline tapping of any 70-volt signal up to 35 watts per channel, and fits into a standard single gang light switch box. A dual transformer design allows the CV1 to handle stereo signal for background music and paging systems with nine volume level positions on the simple rotary control, including a full off position for silencing a room remotely. Yorkville CV1 Features: For use with 70-volt speaker systems ONLY Attach inputs and outputs as indicated on diagram Mount securely in wall box (not included) Accommodates true stereo connections Maximum 35-watts per channel 9 volume positions – turn fully counterclockwise for off position Get Your Yorkville CV1 Today! |
|
|
Yorkville YX10 $199.2 Yorkville YX10 The YX10 delivers maximum performance in the most compact loudspeaker available in the YX Series. Engineered in North America, the YX10 benefits from Yorkville's forty plus years of PA enclosure design experience in the creation of this ultra compact general purpose passive loudspeaker enclosure. The YX10 cabinet uses a single 10-inch driver and an injection molded 100 x 25 degree horn with 1-inch throat and 1.4-inch Celestion neodymium compression driver. Yorkville's tried and true dual-bulb CTL protection system protects the horn driver's aluminum diaphragm ensuring unmatched reliability in the field. The YX10 is built road-ready with easy-to-clean, durable black carpet covering, solid internal plywood bracing and reinforced internal component mounts. Designed with working musicians in mind, the YX10 offers rugged 5/8-inch plywood cabinet construction, all metal bar handles, metal input plate, integrated speaker mounts and a custom punched, perforated metal grille to protect the speaker components. A modified trapezoidal shape ensures the YX10 can function equally as well as a front-of-house or monitor speaker. Get Your Yorkville YX10 Today! |
|
|
Yorkville 3-Seat Sofa Silver $1399 Sit and relax in style with the Yorkville Sofa in a variety of colors. You are sure to be impressed by the generous size, comfortable cushioning and lovely detailing reflected in the sofas from this range. A classy addition to your living room, the high quality materials and fine workmanship combine to create an impressive designer piece. |
 |
Yorkville CV1 In Wall Speaker Volume Control 70 Volt Maximum 35 Watts Per Channel 9 Positions
List Price:  |
 |
Yorkville CM570 70 Volt Ceiling Speaker Passive 5 Inch Speaker 30 Watt Transformer
List Price: |
 |
Yorkville C2890 2 Way 8 Inch Flyable Speaker Cabinet 2-Way 200 Watt 1 Inch Horn
List Price: |
Yorkville C120P Coliseum Mini Series Installation Active Loudspeaker @ FrontEndAudio.com
