http://www.neonlightssigns.info/soundcraft-audio/
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Soundcraft Audio
audio mixer and preamp hookup?
I have a dbx preamp, and a soundcraft mixer. I want to tun the mic through the dbx, then to the mixer, so I can use the dbx preamp. So, right now I have my ADK microphone plugged into the the mic input on the preamp. Then I have the 1/4 inch output running into the 1/4 inch on channel one in the mixer, and I get no sound. So I'm guessing that I might have to buy a 1/4 plug to female mic end, then plug the mic end into the mixer and just not run 48V on the mixer? Does this sound right?
yes the mic works when plugged directly into the mixer when I turn the mixers 48v on. Like I said though...I want to the dbx preamp and not the soundcraft mixers preamp. This is hella hard trying to explain....heh
Does the mic work when you go directly into the mixer, or do you need the pre-amp? It doesnt soud as if you are doing anything wrong.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
|
Soundcraft MH3 Audio Link Cable $715.5 Soundcraft MH3 Audio Link Cable Soundcraft MH3 Audio Link Cable Description: MH3 Audio Link Cable Used for linking two consoles Get your Soundcraft MH3 Audio Link Cable today! |
|
|
Soundcraft Spare Audio Link Cable for Expander $103.5 Soundcraft Spare Audio Link Cable for Expander Soundcraft Spare Audio Link Cable for Expander Description: Spare Audio Link Cable for Expander Spare Get your Soundcraft Spare Audio Link Cable for Expander today! |
|
|
Soundcraft EFX12 $499 Soundcraft EFX12 Soundcraft EFX12 Description: The Soundcraft EFX™ Series combines all the features of the popular Soundcraft EPM™ mixer with a built-in 24-bit, digital Lexicon® effects processor, expanding the Soundcraft low-cost, multipurpose compact range. The Soundcraft EFX mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Soundcraft EFX also offers all the features of the Soundcraft EPM most notably a configurable aux send, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output. Soundcraft EFX12 Features: 8+2 and 12+2 channel frame sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel 1 configurable auxiliary bus XLR-type and 1/4" metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 3-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable Dimensions: Boxed 18.5" x 7.5" x 21.7" Actual 3.56" x 14.25" x 17.00" Shipping Weight:15.9 lbs Get your Soundcraft EFX12 today! |
|
|
Soundcraft EFX8 $399 Soundcraft EFX8 Soundcraft EFX8 Description: The Soundcraft EFX™ Series combines all the features of the popular Soundcraft EPM™ mixer with a built-in 24-bit, digital Lexicon® effects processor, expanding the Soundcraft low-cost, multipurpose compact range. The Soundcraft EFX mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Soundcraft EFX also offers all the features of the Soundcraft EPM most notably a configurable aux send, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output. Soundcraft EFX8 Features: 8+2 and 12+2 channel frame sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel 1 configurable auxiliary bus XLR-type and 1/4" metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 3-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable Dimensions: Boxed 18.5" x 7.5" x 17.7" Actual 3.56" x 14.25" x 13.00" Shipping Weight:21.1 lbs Get your Soundcraft EFX8 today! |
|
|
Soundcraft EPM6 $249 Soundcraft EPM6 Soundcraft EPM6 Description: Low-cost high-performance mixers Soundcraft have unveiled another addition to the rapidly growing new Soundcraft family, the multi-format low-cost EPM mixers. The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types. A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors. Soundcraft EPM6 Features: Frame sizes 6+2, 8+2 and 12+2 2 configurable auxiliary buses XLR-type and 1/4" metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 2-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs and mix output Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable The Soundcraft EPM will find itself in many applications including live music, recording, houses of worship and multi-speaker installations. Soundcraft EPM6 Specifications: Precision GB30 mic pre-amps Three band EQ with swept mid frequency Multi-point signal channel status monitoring with proportional illumination Smooth 60mm faders on all inputs and masters True, professional +48V phantom power for condenser microphones Professional insert points for external processing 6, 8 and 12 mono input channel frame sizes, each with two stereo inputs 2 Aux sends, each globally switchable pre or post-fade Universal internal power supply Dimensions: Boxed 18.5" x 7.5" x 15.7" Actual 3.56" x 14.25" x 11.00" Shipping Weight:11.2 lbs Get your Soundcraft EPM6 today! |
|
|
Soundcraft EPM8 $299 Soundcraft EPM8 Soundcraft EPM8 Description: Low-cost high-performance mixers Soundcraft have unveiled another addition to the rapidly growing new Soundcraft family, the multi-format low-cost EPM mixers. The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types. A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors. Soundcraft EPM8 Features: Frame sizes 6+2, 8+2 and 12+2 2 configurable auxiliary buses XLR-type and 1/4" metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 2-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs and mix output Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable The Soundcraft EPM will find itself in many applications including live music, recording, houses of worship and multi-speaker installations. Soundcraft EPM8 Specifications: Precision GB30 mic pre-amps Three band EQ with swept mid frequency Multi-point signal channel status monitoring with proportional illumination Smooth 60mm faders on all inputs and masters True, professional +48V phantom power for condenser microphones Professional insert points for external processing 6, 8 and 12 mono input channel frame sizes, each with two stereo inputs 2 Aux sends, each globally switchable pre or post-fade Universal internal power supply Dimensions: Boxed 18.5" x 7.5" x 17.7" Actual 3.56" x 14.25" x 13.00" Shipping Weight:21.1 lbs Get your Soundcraft EPM8 today! |
|
|
Soundcraft EPM12 $399 Soundcraft EPM12 Soundcraft EPM12 Description: Low-cost high-performance mixers Soundcraft have unveiled another addition to the rapidly growing new Soundcraft family, the multi-format low-cost EPM mixers. The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types. A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors. Soundcraft EPM12 Features: Frame sizes 6+2, 8+2 and 12+2 2 configurable auxiliary buses XLR-type and 1/4" metal jack connector sockets RCA phono stereo playback inputs and record outputs 3-band EQ with a swept mid on mono inputs 2-band EQ on stereo inputs TRS insert sockets and inserts on all mono inputs and mix output Ten-segment LED output metering Intuitive and comprehensive solo system Headphone output Easily rack mountable The Soundcraft EPM will find itself in many applications including live music, recording, houses of worship and multi-speaker installations. Soundcraft EPM12 Specifications: Precision GB30 mic pre-amps Three band EQ with swept mid frequency Multi-point signal channel status monitoring with proportional illumination Smooth 60mm faders on all inputs and masters True, professional +48V phantom power for condenser microphones Professional insert points for external processing 6, 8 and 12 mono input channel frame sizes, each with two stereo inputs 2 Aux sends, each globally switchable pre or post-fade Universal internal power supply Dimensions: Boxed 18.5" x 7.5" x 21.7" Actual 3.56" x 14.25" x 17.00" Shipping Weight:15.9 lbs Get your Soundcraft EPM12 today! |
|
|
Soundcraft MFX8 $499 Soundcraft MFX8 Soundcraft MFX8 Description: The MFX Series combines all the features of the popular Soundcraft MPM™ mixer with a built-in 24-bit, digital, Lexicon® effects processor, expanding the Soundcraft low-cost, multi-purpose compact range. The Soundcraft MFX™ mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The effects section fits neatly into the mixers compact framework which is available in 8, 12 or 20 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 different effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Soundcraft MFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft MFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles). The Soundcraft MFX also offers all the features of the Soundcraft MPM most notably two configurable aux sends, two groups, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output. Soundcraft MFX8 Features: 8+2, 12+2 and 20+2 channel input frame-sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel 2 configurable Aux busses 2 Stereo Inputs 2 Group busses Stereo Mix Output 2-track record output 2-track replay input with level control Globally switched +48V Phantom Power GB30 Mic Preamps Peak LED 100Hz HPF Insert point (mono channels) 3-band EQ with swept Mid band on mono inputs 3-band EQ on stereo inputs PFL switch Mix and group routing Signal Present LED 60mm fader Headphone and Control Room outputs with level control 8+2 and 12+2 models rack-mountable (ears sold separately) Integral universal power supply Dimensions: Boxed 19.3" x 7.9" x 22.8" Actual 3.7" x 16.0" x 15.1" Shipping Weight:17.0 lbs Get your Soundcraft MFX8 today! |
|
|
Soundcraft MFX12 $599 Soundcraft MFX12 Soundcraft MFX12 Description: The MFX Series combines all the features of the popular Soundcraft MPM™ mixer with a built-in 24-bit, digital, Lexicon® effects processor, expanding the Soundcraft low-cost, multi-purpose compact range. The Soundcraft MFX™ mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The effects section fits neatly into the mixers compact framework which is available in 8, 12 or 20 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 different effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Soundcraft MFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft MFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles). The Soundcraft MFX also offers all the features of the Soundcraft MPM most notably two configurable aux sends, two groups, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output. Soundcraft MFX12 Features: 8+2, 12+2 and 20+2 channel input frame-sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel 2 configurable Aux busses 2 Stereo Inputs 2 Group busses Stereo Mix Output 2-track record output 2-track replay input with level control Globally switched +48V Phantom Power GB30 Mic Preamps Peak LED 100Hz HPF Insert point (mono channels) 3-band EQ with swept Mid band on mono inputs 3-band EQ on stereo inputs PFL switch Mix and group routing Signal Present LED 60mm fader Headphone and Control Room outputs with level control 8+2 and 12+2 models rack-mountable (ears sold separately) Integral universal power supply Dimensions: Boxed 19.3" x 7.9" x 22.8" Actual 3.7" x 16.0" x 17.0" Shipping Weight:17.2 lbs Get your Soundcraft MFX12 today! |
|
|
Soundcraft MFX20 $799 Soundcraft MFX20 Soundcraft MFX20 Description: The MFX Series combines all the features of the popular Soundcraft MPM™ mixer with a built-in 24-bit, digital, Lexicon® effects processor, expanding the Soundcraft low-cost, multi-purpose compact range. The Soundcraft MFX™ mixer uses the same AudioDNA® processor featured in many of the Digitech® and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The effects section fits neatly into the mixers compact framework which is available in 8, 12 or 20 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 different effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Soundcraft MFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft MFX uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series consoles). The Soundcraft MFX also offers all the features of the Soundcraft MPM most notably two configurable aux sends, two groups, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output. Soundcraft MFX20 Features: 8+2, 12+2 and 20+2 channel input frame-sizes Built-in 24 bit Lexicon digital effects processor 32 FX settings Tap Tempo and FX setting store function 1 FX send on each channel 2 configurable Aux busses 2 Stereo Inputs 2 Group busses Stereo Mix Output 2-track record output 2-track replay input with level control Globally switched +48V Phantom Power GB30 Mic Preamps Peak LED 100Hz HPF Insert point (mono channels) 3-band EQ with swept Mid band on mono inputs 3-band EQ on stereo inputs PFL switch Mix and group routing Signal Present LED 60mm fader Headphone and Control Room outputs with level control 8+2 and 12+2 models rack-mountable (ears sold separately) Integral universal power supply Dimensions: Boxed 19.3" x 7.9" x 31.5" Actual 3.7" x 16.0" x 27.0" Shipping Weight:26.0 lbs Get your Soundcraft MFX20 today! |
|
|
Soundcraft MH2 24 Channel Dust Cover $85.5 Soundcraft MH2 24 Channel Dust Cover Soundcraft MH2 24 Channel Dust Cover Description: MH2 24 Channel Dust Cover The Soundcraft/Spirit TZ2469 Dust Cover is a replacement for the dust cover included with the Soundcraft/Spirit MH2 24 channel audio mixer. Grey vinyl dust cover protects console from dust and dirt. Compatible with: Soundcraft/Spirit MH2 24 channel audio mixer Get your Soundcraft MH2 24 Channel Dust Cover today! |
|
|
Soundcraft MH2 32 Channel Dust Cover $94.5 Soundcraft MH2 32 Channel Dust Cover Soundcraft MH2 32 Channel Dust Cover Description: MH2 32 Channel Dust Cover The Soundcraft/Spirit TZ2470 Dust Cover is a replacement for the dust cover included with the Soundcraft/Spirit MH2 32 channel audio mixer. Grey vinyl dust cover protects console from dust and dirt. Compatible with: Soundcraft/Spirit MH2 32 channel audio mixer Get your Soundcraft MH2 32 Channel Dust Cover today! |
|
|
Soundcraft MH2 40 Channel Dust Cover $103.5 Soundcraft MH2 40 Channel Dust Cover Soundcraft MH2 40 Channel Dust Cover Description: MH2 40 Channel Dust Cover The Soundcraft/Spirit TZ2471 Dust Cover is a replacement for the dust cover included with the Soundcraft/Spirit MH2 40 channel audio mixer. Grey vinyl dust cover protects console from dust and dirt. Compatible with: Soundcraft/Spirit MH2 40 channel audio mixer Get your Soundcraft MH2 40 Channel Dust Cover today! |
|
|
Soundcraft MH2 48 Channel Dust Cover $112.5 Soundcraft MH2 48 Channel Dust Cover Soundcraft MH2 48 Channel Dust Cover Description: MH2 48 Channel Dust Cover The Soundcraft/Spirit TZ2472 Dust Cover is a replacement for the dust cover included with the Soundcraft/Spirit MH2 48 channel audio mixer. Grey vinyl dust cover protects console from dust and dirt. Compatible with: Soundcraft/Spirit MH2 48 channel audio mixer Get your Soundcraft MH2 48 Channel Dust Cover today! |
|
|
Soundcraft BB100 Blank module $72 Soundcraft BB100 Blank module Soundcraft BB100 Blank module Description: BB100 Blank module Module Slots :1 Slot BB100 series are designed to satisfy your need for a more cost effective, small format audio console for Production and On-Air applications BB100 is packed with all the features you needed, all the performance you expect and all the reliability you demand. BB100 is available in configurations from 10 to 32 input channels, with four stereo or eight mono subgroups, and offering fully balanced input and output connections. The BB100 features four internal mix minus feeds as standard and is easily configurable for a variety of custom options through internal factory-set links. Get your Soundcraft BB100 Blank module today! |
|
|
Soundcraft EFX 8-Channel Mixer $399 The 8-Channel Soundcraft EFX mixer uses the same AudioDNA processor featured in many Digitech and Lexicon outboard products, including the highly respected Lexicon MX500 processor. The Soundcraft EFX Series combines all the features of the popular Soundcraft EPM mixer with a built-in 24-bit, digital Lexicon effects processor, expanding the Soundcraft low-cost, multipurpose compact range.With over 35 years of experience, the Lexicon name is among top creators of reverb and processing equipment in the business, ensuring the finest quality effects not usually found in a console at this price level.The Effects section fits neatly into the mixer's compact framework, with 2 stereo channels and an effects-send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls, and a user effects setting store facility. An effects channel level clip LED and Mute function give the user even more flexibility.The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy-to-understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Soundcraft EFX also offers all the features of the Soundcraft EPM, most notably a configurable aux send, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, a 3-band EQ with a swept mid on the mono inputs, a 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output.The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.8mono + 2 stereo channel frame sizesBuilt-in 24 bit Lexicon digital effects processor32 FX settingsTap tempo and FX setting store function1 effects-send on each channel1 configurable auxiliary busXLR-type and 1/4" metal jack connector socketsRCA phono stereo playback inputs and record outputs3-band EQ with a swept mid on mono inputs3-band EQ on stereo inputsTRS insert sockets and inserts on all mono inputsTen-segment LED output meteringIntuitive and comprehensive solo systemHeadphone outputEasily rack mountable |
|
|
Soundcraft Efx 12-Channel Mixer $499 The 12-Channel Soundcraft EFX mixer uses the same AudioDNA processor featured in many of the Digitech and Lexicon outboard products, including the highly respected Lexicon MX500 processor. The Soundcraft EFX Series combines all the features of the popular Soundcraft EPM mixer with a built-in 24-bit, digital Lexicon effects processor, expanding the Soundcraft low-cost, multipurpose compact range.With over 35 years of experience, the Lexicon name is among top creators of reverb and processing equipment in the business, ensuring the finest quality effects not usually found in a console at this price level.The Effects section fits neatly into the mixer's compact framework, with 2 stereo channels and an effects-send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls, and a user effects setting store facility. An effects channel level clip LED and Mute function give the user even more flexibility.The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy-to-understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Soundcraft EFX also offers all the features of the Soundcraft EPM, most notably a configurable aux send, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, a 3-band EQ with a swept mid on the mono inputs, a 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output.The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.12mono + 2 stereo channel frame sizesBuilt-in 24 bit Lexicon digital effects processor32 FX settingsTap tempo and FX setting store function1 effects-send on each channel1 configurable auxiliary busXLR-type and 1/4" metal jack connector socketsRCA phono stereo playback inputs and record outputs3-band EQ with a swept mid on mono inputs3-band EQ on stereo inputsTRS insert sockets and inserts on all mono inputsTen-segment LED output meteringIntuitive and comprehensive solo systemHeadphone outputEasily rack mountable |
|
|
Soundcraft Efx 8-Channel Mixer $399 The 8-Channel Soundcraft EFX mixer uses the same AudioDNA processor featured in many Digitech and Lexicon outboard products, including the highly respected Lexicon MX500 processor. The Soundcraft EFX Series combines all the features of the popular Soundcraft EPM mixer with a built-in 24-bit, digital Lexicon effects processor, expanding the Soundcraft low-cost, multipurpose compact range.With over 35 years of experience, the Lexicon name is among top creators of reverb and processing equipment in the business, ensuring the finest quality effects not usually found in a console at this price level.The Effects section fits neatly into the mixer's compact framework, with 2 stereo channels and an effects-send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls, and a user effects setting store facility. An effects channel level clip LED and Mute function give the user even more flexibility.The emphasis with the Soundcraft EFX is very firmly on quality build and audio performance, with an easy-to-understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly transparent GB30 Mic amp (designed by Graham Blyth for the company's 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Soundcraft EFX also offers all the features of the Soundcraft EPM, most notably a configurable aux send, XLR and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, a 3-band EQ with a swept mid on the mono inputs, a 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output.The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.8mono + 2 stereo channel frame sizesBuilt-in 24 bit Lexicon digital effects processor32 FX settingsTap tempo and FX setting store function1 effects-send on each channel1 configurable auxiliary busXLR-type and 1/4" metal jack connector socketsRCA phono stereo playback inputs and record outputs3-band EQ with a swept mid on mono inputs3-band EQ on stereo inputsTRS insert sockets and inserts on all mono inputsTen-segment LED output meteringIntuitive and comprehensive solo systemHeadphone outputEasily rack mountable |
| Account limit of 2104 requests per hour exceeded. |
Soundcraft MFX Multi-Purpose Mixer
help with pc firewire and usb -_-?
I have this laptop http://reviews.cnet.com/laptops/hp-compaq-presario-cq60z/4505-3121_7-33483183.html
and i want this digital audio mixer http://pro-audio.musiciansfriend.com/product/Soundcraft-LX7ii-24Channel-Mixer?sku=630928
the problem is that my laptop does not have firewire only usb 2.0 and the mixer has only firewire.....
is there anyway that i can convert the firewire to usb with a cable or a hub? or should i get some cheap mac or something to only use for audio editing and such.... help please im really sad that this mixer only has firewire -_-
Either you gave us a bad link with the Soundcraft LX7ii 24-Channel Mixer, or I'm missing something in the documentation. I see no sign of that device having any type of Firewire or Midi connector in the specifications or manual.
Many laptops can handle firewire. If they don't have it built in, it can be added via PCMCIA or Cardbus card. Neither type is available on your budget laptop, so you're out of luck.
