http://www.neonlightssigns.info/dbx-signal-processing/
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Dbx Signal Processing
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
|
DBX Drive Rack 220i $599.95 DBX Drive Rack 220i Designed from the ground up to provide state-of-the-art signal processing, the DriveRack 220i is the perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations. The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes. Features: Advanced Feedback Suppression (AFS) Graphic and Parametric EQ Compressor Limiter Auto Gain Control Noise Gating De-Esser Ducker Bandpass Filters 2x2 Matrix Mixer 1.3 Seconds of Delay RS-232 PC GUI control Mic/Line Inputs Wall Panel Control Security Lockout |
|
|
DBX 442 Drive Rack $2099 DBX 442 Drive Rack 442 DriveRack® Complete Equalization Management System. The DriveRack® 442 Complete Equalization Management System is the latest product in the DriveRack® line. The 442 is based on the same operating system as the DriveRack® 480 and offers the user four inputs and four outputs on XLR connectors. Each channel has EQ in the form of a 9-Band Parametric or a 31-Band Graphic and Notch Filters. In addition the 442 features a filter set that can be used to create a Highpass, Lowpass or Bandpass filter. Dynamics processing is available on all channels with a Compressor/Limiter that emulates the classic dbx® 160. The output section of the 442 offers delay, output level and phase compensation. The 442 is also capable of running dual real-time analyzers on channels three and four. A 480 master, a PC GUI, or a 480R remote can control the 442. Any combination of 480s, 481s, 482s and 442s can be controlled on a single DriveRack® network consisting of up to 100 units. The 442 DriveRack® continues the legacy DriveRack® series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. dbx® Professional Products has created a product that caters to numerous applications in tour sound and sound contractor requirements. The 442 DriveRack® was designed with the purpose and vision of providing four independent channels of processing power that includes 31-Band Graphic equalizer, as well as dbx's own industry standard dynamics processing. All aspects of the aforementioned features can be controlled by the included dbx® Professional Products Interactive DriveWare™ software. Software updates can also be downloaded instantly through the RS 232 port.The 442 DriveRack® continues the legacy DriveRack® series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. dbx® Professional Products has created a product that caters to numerous applications in tour sound and sound contractor requirements. The 442 DriveRack® was designed with the purpose and vision of providing four independent channels of processing power that includes 31-Band Graphic equalizer, as well as dbx's own industry standard dynamics processing. All aspects of the aforementioned features can be controlled by the included dbx® Professional Products Interactive DriveWare™ software. Software updates can also be downloaded instantly through the RS 232 port. Features: 4 Input and 4 Outputs 31 band graphic or 9 band parametric equalizer on every input Time Alignment Delay Compressor/Limiter on every output Multi-level Security System Separate House and Show EQ with individual lockouts Triple redundant back up of all parameters when running network, 480R and GUI TYPE IV™ Conversion System Electronically balanced/RF filtered XLR Inputs and Outputs Proprietary RS-485 Control Network RS-232 P |
|
|
DBX Drive Rack Studio $549.95 DBX Drive Rack Studio The dbx Professional Products DriveRack Studio provides all of the tools necessary to optimize Studio Monitor management in a single rack mount chassis design regardless of the environment. The DriveRack Studio offers dual XLR inputs and six XLR outputs, dual channel graphic EQ, classic dbx Compression, multiple crossovers, parametric EQ and a built-in real time audio analyzer. In addition, this audio toolbox provides the end user with 24 custom presets that have been specifically written and designed to work in tandem with the most popular studio reference monitors available. The DriveRack Studio now allows you to fine-tune even the most sonically challenged rooms. The DriveRack Studio continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack Studio was designed with the purpose and vision of providing state-of-the-art signal processing in the studio environment, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus™ limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. Features: 24 Custom Factory Programs Optimized for Studio Monitor Management Dual 28-band Graphic EQ Classic dbx® Compressor 120A Sub-harmonic Synthesizer 2x3, 2x4, 2x5, 2x6 Crossover Configurations Stereo Multi-band Parametric EQ Stereo Output Limiters Alignment Delay Pink Noise Generator Auto-EQ with 28-Band RTA 2-Channel XLR Input and 6 Channel XLR Output Front panel RTA-M XLR input with phantom power 24-Bit ADC/24-Bit DAC. >110dB Dynamic Range TYPE IV® Conversion System Full Graphic LCD Display |
|
|
dbx iEQ-15 Graphic EQ $482.25 dbx iEQ-15 Visionary Design: The iEQ-15 offers the built-in necessities including AFS feedback Suppression, Type V noise reduction and PeakStopPlus limiting. Besides including two 15-band channels of 2/3 octave equalization, the iEQ-15 also offers +/- 12 dB input gain range; switchable +/- 6 or +/- 15 dB boost/cut range, 40 mm faders, XLR, 1/4" and Euroblock inputs and outputs, nonconductive nylon siders; and an intuitive user interface with comprehensive output and gain reduction metering.Revolutionary Engineering: The iEQ series represents a major step forward in the performance of EQs. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22 kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS), dbx proprietary Type V noise reduction and PeakStopPlus limiting, the iEQ-15 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-15 is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals' choices in signal processing. With such pristine design and quality, the iEQ-15 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.Dual 15-band EQ AFS one-touch feedback suppression Type V noise reduction PeakStopPlus limiting Switchable ±6 or ±15dB boost/cut range ±12dB input gain range 40mm faders Nonconductive nylon sliders 10Hz to 22kHz frequency response 110dB dynamic range 2/3-octave Constant Q frequency bands Internal toroidal transformer 1/4" TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs |
|
|
DBX 160A Compressor Limiter $429.95 The dbx 160a Compressor/Limiter decends from the 160 series, introduced in the mid 1970's, and is among world's most popular line of audio compressors. After the classic 160 (which is still used daily in many world class studios), came the 165, the 160X and the 160XT. The 160X/XT were the models that truly became the industry standard. Solid construction, fool proof operation, great sound, at-a-glance metering and a bulletproof output stage all contributed to its popularity with musicians, recording studios, consultants and installers, and broadcast media production people alike. The dbx 160A is a legendary dbx 160 family of compressor/limiters. The same classic sound, easy set-up and no compromise metering is now married to an improved signal path and stronger chassis design. The result is industry standard compressor/limiter which is digital-ready and road tough. dbx 160A Features OverEasy or classic hard knee compression with dbx's ultra-musical program dependent attack and release times Compression ratio variable from 1:1 through infinity :1 to negative compression Precision dual RMS LED display monitors input or putput and gain reduction over a wide range and calibrates for different operating levels Over 60dB of gain reduction available Exclusive Infinity+ compression allows negative compression Independent balanced and unbalanced outputs can drive 600 loads to +24dBm simultaneously. New floating balanced output stage drives any load Optional output transformer capable Strappable with another 160A for true RMS stereo summing operation Featuring switch-selectable OverEasy and Hard Knee compression curves along with extremely wide-ranging threshold, ratio and output controls, the dbx 160A is up to any task. True RMS level detection provides the most natural-sounding dynamics processing available, from subtle compression to brick wall peak limiting. Choose low ratios and OverEasy compression to transparently smooth out fluctuating vocal and instrumental levels. Or use the 160A's Hard Knee compression and high ratios (up to and beyond :1 and over 60dB gain reduction) for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals. The 160A is fully compatible with +4/-10dB and balanced/ unbalanced systems, and its electronically balanced output stage is an outstanding line driver for long cable runs (an output transformer is optional). The 19-segment, switchable input/ output LED metering can be easily calibrated to any operating level. 12-segment gain reduction LEDs provide precise analysis at a glance. The dbx 160A's unique INFINITY + inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway house mix levels. A detector input can be used with an equalizer for de-essing sibilant vocals and selectively smoothing out boomy notes on acoustic guitar and bass. An |
|
|
DBX DriveRack 4800 $3749.95 DBX DriveRack 4800 Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the VGA display and multiple control surfaces, the 4800 provides all the processing, flexibility and control necessary for both installation and live use. The Wizard function enhances its capability by making the DriveRack 4800 easier to use providing a menu based setup procedure including system configuration, Auto-EQ, and an Advanced Feedback Suppression™ (AFS™) Wizard. The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide "Everything you need between the mixer and the power amps". In keeping with this philosophy the 4800 includes four inputs and eight outputs with both analog and AES/EBU XLR connectivity; a CobraNet option rounds it out offering greater flexibility for large installations. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response. From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world's leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack provides a full color display to speed manual operation; this combined with intuitive front panel controls, an easy to use GUI and optional wall panel controllers means that whether your application is tour sound or installation, the DriveRack 4800 has what it takes. |
|
|
DBX 286S Mic Preamp Processor $199.95 The DBX 286S is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine DBX 286S Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. DBX 286S Mic Preamp Processor Features Studio quality Mic Preamp/Channel Strip Processor Classic dbx Compression puts great sound within easy reach Frequency tunable De-Esser reduces sibilance and high frequency distortion Enhancer increases the detail and definition of the high and low frequencies Program adaptive Expander/Gate Insert jack allows you to add an external processor Full compliment of meters and status LEDs +48V Phantom Power Precision detented controls Use the patented DBX OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic in your face vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. The DBX 286S offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4 inch TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to loop out to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination. The cost and hassle of patching together multiple processors for use on one track can be frustrating. The DBX 286S provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best! |
|
|
DBX IEM In-Ear Monitor Processor $1299 IEM in ear monitor Finally! There is now a digital signal processor that has been designed specifically for in ear monitor applications. New from dbx Professional Products, comes the IEM, In-Ear-Monitor Processor which is the ideal tool for fine-tuning mix monitoring for In-Ear monitoring devices. Not only does the IEM provide the legendary dbx effects in the digital domain, such as 4-band stereo compression, PeakStop™ limiting and 5-band parametric EQ, but the IEM also includes stereo adjust, dbx proprietary Type IV™ conversion system, and for good measure, we have even raised the playing field by including custom reverb algorithms using the industry standard Lexicon® technology. The IEM from dbx Professional Products is a unit that is certain to take In-Ear Monitor processing to the next level.From the company that has been redefining the standard of signal processing for more than 25 years, dbx® Professional Products now offers a bulletproof product that caters to the scrutinizing needs of performers who utilize In-Ear Monitorin devices. The IEM was designed with the simple purpose and vision of enhancing the sonic quality of all In-Ear monitor applications, while providing the necessary audio level protection that artists and engineers require. The design team at dbx has achieved this vision by building a unit that offers effects including: 4-band stereo compressor with gating and limiting, 5-Band Parametric EQ, PeakStop™ limiting, Stereo adjust and Lexicon® reverbs. In addition to methodically designing a utilitarian unit that includes an intuitive user front panel which provides instant access to all effects within the IEM at the push of a button, as well as a large custom display which clearly shows all operational information of the unit in a logical manner. Features: Industry-Standard Lexicon Reverb Algorithms 48-bit internal signal path for increased head room and low level resolution Type IV™ A/D Conversion system with TSE 4-band stereo compressor and limiter with classic dbx® compression 5-band EQ - Hi and Lo shelves, 3-band fully parametric PeakStop™ limiting Stereo adjust - to control your stereo image 4-band crossover with variable slopes |
|
|
DBX DriveRack PA $499.95 DBX DriveRack PA Drive your PA to a whole new level of performance with the DriveRack® PA Complete Equalization & Loudspeaker Control System. The DriveRack® PA from dbx Professional Products® represents a complete integration of the key elements that help ensure optimal loudspeaker system management in PA-specific applications. Capitalizing on the legendary 480 DriveRack® technology, the DriveRack® PA is able to provide its user with top-tier, pro-level loudspeaker management specifications, yet still remain appealing to the budget-conscious audiophile who requires a tried and true utilitarian workhorse. With its all-inclusive, no-compromise design, the DriveRack® PA has been systematically developed and designed to grow with your system needs for years to come. The DriveRack® PA continues the legacy of DriveRack® series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack® PA was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus™ limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. Features: Stereo Feedback Elimination with 12 feedback notch filters Dual 28-band Graphic EQ Classic dbx® Compressor 120A Sub-harmonic Synthesizer 2x3, 2x4, 2x5, 2x6 Crossover Configurations Stereo Multi-band Parametric EQ Stereo Output Limiters Alignment Delay Pink Noise Generator Auto-EQ with 28-Band RTA JBL® Speaker and Crown Power Amp Tunings with Setup Wizard 25 User Programs / 25 Factory Programs 2 Channel XLR Input and 6 Channel XLR Output Front panel RTA-M XLR input with phantom power 24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range TypeIV® Conversion System Full Graphic LCD Display |
|
|
Dbx 215S Dual Channel 15-Band Graphic Equalizer $159.95 When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB |
|
|
DBX 286A Microphone Processor $199.95 286A Microphone Processor The dbx® 286A's Mic Preamp and Five processors can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The dbx 286A's sonically pristine Mic Preamp has all the features you need, including wide-ranging input gain control, switchable 48V phantom power and an 80Hz high-pass filter. Use the 286A's newly designed and patented OverEasy® Compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" rock vocal. Take out vocal sibilance and high frequency distortion in cymbals with the 286A's frequency tunable De-Esser. Fine-tune the Enhancer's HF Detail control to add sparkle and crispness to tracks. LF Detail control adds fullness and depth to vocals and bass instruments while simultaneously cleaning up muddy low midrange frequencies. And, the Expander/Gate's separate threshold and ratio controls allow you to subtly reduce headphone leakage or radically gate noisy guitar amps. The dbx® 286A's full complement of metering and status LEDs visually guide you to achieving the right sound. The floating balanced XLR mic input accepts balanced or unbalanced inputs. An additional 14" TRS phone jack can accept balanced/ unbalanced line signals to process live electronic instruments or pre-recorded tracks at mixdown. An insert jack between the 286A's Mic Preamp and signal processing sections can be used to "loop out" to external processors (such as EQ) or to mix the Mic Preamp's signal out to an external destination. The cost and hassle of patching together multiple processors for use on one track can be frustrating. The dbx® 286A gives you all the tools you'll need in one box, with the shortest signal path to help keep your music sounding clean Features: New dbx® standard internal power supply Frequency control for De-Esser Expanded meter to show heavy De-Essing Above/Below threshold indicator for gate +48VDC Phantom Power Precision detented controls |
|
|
DBX Zone Pro 640 $999.95 DBX Zone Pro 640 The ZonePro products have been created to provide state-of-the-art signal processing for Background Music (BGM) applications, while maintaining a simple, secure and intuitive interface. From the powerful DSP modules to the multiple control interfaces, the ZonePro products provide all the processing and control necessary for BGM installations. Additionally, the GUI interface and Wizard function allows any contractor to quickly set up and optimize the unit to its full potential by streamlining the setup process and providing a menu based setup procedure that includes system setup and configuration. The ZonePro products are based on the same unparalleled design philosophy that made the DriveRack family famous. This philosophy, "To provide everything you need between the sources and the amplifiers," creates a full featured processor capable of almost any BGM application. The ZonePro products offer two mic/line inputs on Euroblock connectors, and four line inputs on mono-summing dual RCA jacks. Outputs are also on Euroblock connectors. Each input channel provides EQ, while the mic/line inputs also offer two DSP insert blocks with a selection of Compression, Notch Filtering, Auto Gain Control, Advanced Feedback Suppression (AFS™), Gating, and De-Essing. Each output zone provides a routing matrix where each of the inputs can be selected as the main source or priority source. Paging can be done from the Mic/line inputs; both paging and priority override offer full Ducking capability. Each output also provides Autowarmth®, full Bandpass and Crossover filtering, Parametric EQ, a selectable Dynamics module and output Delay. Specifications: Advanced Feedback Suppression (AFS™) Autowarmth® Auto Gain Control Compression Limiting Noise Gating Notch Filtering Bandpass and Crossover Filters Parametric EQ Security Lockout Wall Panel Control RS-232 Control Windows® 2000 and XP GUI IEC, UL and CSA Approvals |
|
|
DBX Zone Pro 641 $849.95 DBX Zone Pro 641 The 641 offers the same features as the 640, while utilizing a tamper-proof front panel. The ZonePro products have been created to provide state-of-the-art signal processing for Background Music (BGM) applications, while maintaining a simple, secure and intuitive interface. From the powerful DSP modules to the multiple control interfaces, the ZonePro products provide all the processing and control necessary for BGM installations. Additionally, the GUI interface and Wizard function allows any contractor to quickly set up and optimize the unit to its full potential by streamlining the setup process and providing a menu based setup procedure that includes system setup and configuration. The ZonePro products are based on the same unparalleled design philosophy that made the DriveRack family famous. This philosophy, "To provide everything you need between the sources and the amplifiers," creates a full featured processor capable of almost any BGM application. The ZonePro products offer two mic/line inputs on Euroblock connectors, and four line inputs on mono-summing dual RCA jacks. Outputs are also on Euroblock connectors. Each input channel provides EQ, while the mic/line inputs also offer two DSP insert blocks with a selection of Compression, Notch Filtering, Auto Gain Control, Advanced Feedback Suppression (AFS™), Gating, and De-Essing. Each output zone provides a routing matrix where each of the inputs can be selected as the main source or priority source. Paging can be done from the Mic/line inputs; both paging and priority override offer full Ducking capability. Each output also provides Autowarmth®, full Bandpass and Crossover filtering, Parametric EQ, a selectable Dynamics module and output Delay. Specifications: Advanced Feedback Suppression (AFS™) Autowarmth® Auto Gain Control Compression Limiting Noise Gating Notch Filtering Bandpass and Crossover Filters Parametric EQ Security Lockout Wall Panel Control RS-232 Control Windows® 2000 and XP GUI IEC, UL and CSA Approvals |
|
|
DBX 160A Compressor/Limiter $399.95 160A Compressor/Limiter Since its introduction in the mid 1970's, the dbx 160 series has been the world's most popular line of audio compressors. After the classic 160 (which is still used daily in many world class studios), came the 165, the 160X and the 160XT. The 160X/XT were the models that truly became the industry standard. Solid construction, fool proof operation, great sound, at-a-glance metering and a bulletproof output stage all contributed to its popularity with musicians, recording studios, consultants and installers, and broadcast media production people alike. The dbx® 160A is a legendary dbx® 160 family of compressor/limiters. The same classic sound, easy set-up and no compromise metering is now married to an improved signal path and stronger chassis design. The result is industry standard compressor/limiter which is digital-ready and road tough. Featuring switch-selectable OverEasy® and Hard Knee compression curves along with extremely wide-ranging threshold, ratio and output controls, the dbx 160A is up to any task. True RMS level detection provides the most natural-sounding dynamics processing available, from subtle compression to "brick wall" peak limiting. Choose low ratios and OverEasy® compression to transparently smooth out fluctuating vocal and instrumental levels. Or use the 160A's Hard Knee compression and high ratios (up to and beyond :1 and over 60dB gain reduction) for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals. The 160A is fully compatible with +4/-10dB and balanced/ unbalanced systems, and its electronically balanced output stage is an outstanding line driver for long cable runs (an output transformer is optional). The 19-segment, switchable input/ output LED metering can be easily calibrated to any operating level. 12-segment gain reduction LEDs provide precise analysis at a glance. The dbx® 160A's unique "INFINITY +" inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway house mix levels. A detector input can be used with an equalizer for de-essing sibilant vocals and selectively smoothing out boomy notes on acoustic guitar and bass. And two 160As can be stereo-coupled to process an entire mix or instruments mic'd in stereo, without shifting the left/right image. Its musical sound, easy operation and unequaled versatility made the original dbx® 160 a world standard. The 160A follows that tradition, while meeting the challenges of a digital world. Features: OverEasy® or classic hard knee compression with dbx's® ultra-musical program dependent attack and release times Compression ratio variable from 1:1 through infinity :1 to negative compression Precision dual RMS LED display monitors input or putput and gain reduction over a wide range and calibrates for different operating le |
|
|
DBX DriveRack 260 Equalization and Loudspeaker Management System $999.95 The dbx DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. dbx DriveRack 260 Features Feedback Elimination 2.7 Seconds of Alignment and Zone Delay RS-232 PC GUI control Classic dbx Compression and Limiting Graphic and Parametric EQ Auto-EQ Function Full Bandpass, Crossover, and Routing Configurations Auto Gain Control Pink Noise Generator and fulltime RTA Setup Wizard with JBL speaker and Crown Power Amplifier Tunings Security Lockout Wall Panel Control Inputs There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx DriveRack products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues. The dbx DriveRack 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS). |
|
|
DBX 480 Drive Rack $2999.95 DBX 480 Drive Rack At the heart of the DriveRack® system is the 480. The 480 includes 4 inputs and 8 outputs which can be tailored for any configuration. By including every form of processing necessary to drive the signal from the mixer to the power amps, such as pre-crossover EQ, notch filters, speaker delay, multiple crossovers, speaker compensation equalizer, driver alignment delay, and compression/limiting, the 480 is truly the only box you'll need for any sound system application. Two real time analyzers can be run simultaneously with RTA source inputs capable of being remotely switched on the fly. The 480 is fully programmable from the front panel, with the 480R remote control, or through a computer via the GUI port. Features: The 480 offers the same as the 480T with the exception of the Jensen™ output transformers 4 Input and 8 Outputs with routing 31 band graphic or 9 band parametric equalizer on every input (pre-crossover) Dual Real Time Audio Analyzers Butterworth, Bessel or Linkwitz-Riley crossover filters 27 Different Crossover Configurations Time Alignment and Transducer Alignment Delays Compressor/Limiter on every output Speaker Compensation EQ (post crossover) Multi-level Security System Separate House and Show EQ with individual lockouts Triple redundant back up of all parameters when running network, 480R and PC GUI TYPE IV™ Conversion System Electronically balanced/RF filtered XLR Inputs and Outputs Proprietary RS-485 Control Network RS-232 PC Interface for computer display and configuration |
|
|
DBX 480T Drive Rack $3599.95 DBX 480T Drive Rack At the heart of the DriveRack® system is the 480. The 480 includes 4 inputs and 8 outputs which can be tailored for any configuration. By including every form of processing necessary to drive the signal from the mixer to the power amps, such as pre-crossover EQ, notch filters, speaker delay, multiple crossovers, speaker compensation equalizer, driver alignment delay, and compression/limiting, the 480 is truly the only box you'll need for any sound system application. Two real time analyzers can be run simultaneously with RTA source inputs capable of being remotely switched on the fly. The 480 is fully programmable from the front panel, with the 480R remote control, or through a computer via the GUI port. Features: The 480T Drive Rack is also fitted with Jensen™ output transformers 4 Inputs and Outputs with routing 31 band graphic or 9 band parametric equalizer on every input (pre-crossover) Dual Real Time Audio Analyzers Butterworth, Bessel or Linkwitz-Riley crossover filters 27 Different Crossover Configurations Time Alignment and Transducer Alignment Delays Compressor/Limiter on every output Speaker Compensation EQ (post crossover) Multi-level Security System Separate House and Show EQ with individual lockout Triple redundant back up of all parameters when running network, 480R and PC GUI TYPE IV™ Conversion System Electronically balanced/RF filtered XLR Inputs and Outputs Proprietary RS-485 Control Network RS-232 PC Interface for computer display and configuration |
|
|
DBX 1074 Quad Noise Gate $499.95 1074 Quad Gate The latest addition to the 10 Series product line, the dbx® 1074 QuadGate™ , is the perfect companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth and release controls on each channel. The 1074, like the rest of the products in dbx 10 Series, is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4" side-chain input. In addition to an external key input per channel, the 1074 also has an internal filter that can be independently activated and controlled on a channel-per-channel basis. This filter allows the 1074 to not only clean up tracks, but gives you frequency selective control on each gate, to open exactly when you want it to. These features combined, make the 1074 an absolute must for those who require quad gating on applications including: Gating dry and percussive sounds such as snare drum and kick drum,gating sounds that have longer decay times such as cymbals and Pianos, gating hum or buzz from live instruments or recorded tracks or eliminating Headphone leakage into microphones. Gating instrument microphones to eliminate amplifier bleed. PeakStopPlus™ - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion. Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression. All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device. So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you. From the company that has been redefining the standard of signal processing for more than 30 years, dbx Professional Products now offers a bulletproof product that caters to the scrutinizing needs of those who require the precision noise gating capabilities. Once again, the engineering staff at dbx Professional Products has taken technology that has been over three decades in the making and created a product that is flexible, versatile and rock solid in construction and design. The 1074's independent channel design with key filtering capabilities make it the perfect tool for countless applications. Features: Four independent channels of gating Independent key filtering Independent Threshold and Release controls Differentially balanced gold-plated XLR and 1/4" inputs and outputs True RMS level detection dbx® proprietary precision metering Stereo Coupling mode Switchable +4dBu or -10dBv operation per channel Proudly designed, manufactured and tested in the USA |
| We did not find any matches for your request. |
dbx 166XL Dual Compressor Limiter Gate
